When clubs ask for "printed" kit they often mean one of two quite different processes. Sublimation dyes the design into the fabric. Printing (screen print, transfer or DTF) puts ink or film on top of it. Which one you want depends on the design, the fabric and how many shirts you need.
What is sublimation?
Sublimation starts with the design printed onto transfer paper using special dyes. The paper is pressed against a white polyester fabric under heat. The dye turns into a gas and bonds with the polyester fibres, then sets as the fabric cools. The garment is then cut and sewn from the printed panels.
Because the colour is inside the fibres rather than sitting on them, there's nothing to crack, peel or wash off, and you can't feel the print. The whole garment can be covered edge to edge, including sleeves and side panels.
Strengths
- Unlimited colours at no extra cost. Gradients, hoops, camouflage and photographic effects cost the same as a plain shirt.
- Durable. Colours survive repeated washing and the print doesn't crack on stretch.
- Light and breathable. No layer of ink to block the fabric, which matters in badminton and netball halls.
- Names and numbers are part of the design, so each shirt is made individually anyway and personalisation costs nothing extra.
Limitations
- It only works on polyester (or high-polyester blends). Cotton won't hold the dye.
- The base fabric is white, so very dark designs can show slight white at seams or creases under stretch.
- It's made to order, so allow time: our custom sublimated kit is 4–6 weeks from proof approval.
What is printed teamwear?
Printed teamwear starts with a ready-made garment in a stock colour. The decoration is then added on top:
- Screen printing pushes ink through a mesh screen, one screen per colour. Cost-effective for large runs of the same logo, but every extra colour adds a screen and a set-up cost.
- Heat transfer and DTF (direct-to-film) print the design onto film and press it onto the garment. Good for small runs and full-colour logos, and works on cotton and polyester. The transfer sits on the surface and can be felt.
- Embroidery stitches the logo in thread. Hard-wearing and premium-looking, best for crests on polos, jackets and bags rather than large designs.
Strengths
- Works on stock garments in many fabrics, including cotton hoodies and bags.
- Often quicker for small quantities if the garment is in stock.
- Embroidery gives a premium finish on leisurewear.
Limitations
- The body colour is limited to what the garment comes in. Stripes and hoops aren't possible.
- Large printed areas reduce breathability and can crack over time, especially on stretchy fabric.
- Multi-colour screen prints get expensive on small runs.
Side by side
- Design freedom: sublimation lets you change every panel; printing is limited to logos on a stock colour.
- Feel: sublimation has no feel; prints and transfers sit on top.
- Durability: sublimation doesn't crack or peel; transfers can lift after many washes.
- Fabric: sublimation needs polyester; printing works on most fabrics.
- Personalisation: names and numbers are free on our sublimated kit; on printed garments each name is an extra transfer.
- Lead time: sublimated kit is made from scratch (4–6 weeks); printing stock items can be quicker if stock is available.
Which should your club choose?
For match shirts, netball dresses, rugby jerseys and training tops, sublimation is usually the better choice. The kit is lighter, the design can be anything, and every player gets their name and number at no extra cost. That's why all of our custom team kit designers, from football kits to netball dresses and rugby shirts, are built for sublimated garments.
Printing and embroidery make sense for leisurewear: cotton T-shirts, hoodies, bags and caps where you want a crest on a stock item. Many clubs do both: sublimated match and training kit, plus embroidered hoodies for travel.
A note on colour matching
Screens and printers show colours differently, so the colour you pick on screen won't be an exact match in fabric. If your club colour has to match precisely (for example a heritage maroon or a sponsor's brand colour), tell us the Pantone reference and mention it when you approve the proof.
Want to see how your design would look? Open the designer on our custom team kit page. You can change every colour panel and add your crest, names and numbers before you request a proof.
Get your club kitted out
Everything you need to take the next step, from the Central Sports teamwear team:
- Custom football kits
- Custom netball kits
- Custom training wear
- Design your Rhino kit online
- Rhino Baselayer Short Sleeve Top
Ready-to-wear kit for your squad
- Rhino Seville 1/4 Zip Midlayer (Royal), £13.90: a plain club layer you can have printed with your crest while the main kit is made.
- Rhino TRM12 Long Sleeve Baselayer, £18.00: the undershirt that goes with any sublimated or printed match shirt.
- Rhino TRM-61 Women's 2-in-1 Skort, £14.40: a value bottom half for netball, hockey and badminton teams.
Ready to compare sublimated and printed for your club? Browse the full custom teamwear range and check the collection page for current offers.


